Lightning and surge protection for rooftop PV systems

Professional planning with an approved concept

The most commonly used PV systems are rooftop systems. They are particularly prone to damage caused by direct and indirect lightning effects due to their exposed location.

Since the PV system is directly connected to the electrical installation of the building, lightning effects can have severe consequences:

Damage to the building resulting from direct lightning effects or fire
Injury of people inside the building
Destruction of or damage to electronic devices caused by direct or indirect lightning effects

Comprehensive protection is therefore necessary and should be planned carefully.

DEHNcube 2 YPV: Generator junction box for PV systems

The prewired system solution DEHNcube 2 YPV provides safety to the PV system. The generator junction box is available for 1MPPT and 2MPPT applications, as well as commonly used inverter types.

One advantage for your work: The push-in connection terminals or cable glands with multiple sealing inserts reduce the installation effort.

Get yourself a reliable protective system! Prevent failures, help your customers to reduce energy costs, as well as make an uninterrupted, positive contribution to climate and environmental protection.

More information

Risk analysis – Prerequisite for professional planning

Professional planning including a risk analysis is indispensable to the safe and reliable operation of PV systems. This risk analysis is performed according to EN 621305-2. It must be adapted to the relevant building and include lightning and surge protection.

Good coordination between the different trades is important

The most important goal of PV installers is to optimise the use of the roof area. Lightning protection installers, however, have to observe the separation distance¹ for the lightning protection system. Lack of coordination may cause considerable problems. Therefore, coordination between roofers / lightning protection installers and installers of photovoltaic systems / electricians is essential not only when constructing a new building, but also when retrofitting roof-mounted systems.

¹What is separation distance? It's the necessary distance between the down conductor and another earthed metal part of the building.

Application examples for rooftop systems

No external lightning protection

Example 1

What is the situation when a photovoltaic system is newly or retrofitted?
Does the new system make lightning protection measures necessary for the entire building?

A - DEHNshield Basic

Main distribution board: The combined arrester is mounted on the busbar directly at the entrance point to the building. It protects electrical installations in the immediate vicinity. Ideal for retrofitting existing buildings.

A - DEHNguard modular

Main distribution board: Protects against overvoltages from inductive couplings by distant lightning strikes and from switching overvoltages. It must be installed downstream of the electricity meter and therefore does not protect the Smart Meter and Smart Meter Gateway.

B - DEHNbox TC180

Internet / telephone / broadband: Combined arrester offers protection in case of direct lightning strikes and overvoltages. It secures the telephone/DSL connection. Compact design, i.e. quick installation in new buildings and simple retrofitting in existing building.

C - DEHNguard M YPV

PV Installation: Type 2 arrester specially designed for application in PV systems. Protects the DC side of the inverter against surges from inductive couplings. If there is more than 10 metres of cable between the PV system and the inverter, a further arrester is necessary in the roof area.

C - DEHNcube YPV SCI 1000

Alternative | PV Installation: Type 2 in enclosure. It is mounted directly upstream of the inverter - available in 2 versions, 1 MPPT and 2 MPPT. If there is more than 10 metres of cable between the PV system and the inverter, a further arrester is necessary in the roof area.

E - UNI earthing clamps/saddle clamps

Clamps suitable for integrating the mounting systems of PV installations in functional equipotential bonding / functional earthing or the lightning equipotential bonding.

F - Equipotential bonding busbars

Equipotential bonding busbars for protective and functional equipotential bonding and lightning protection equipotential bonding.

External lightning protection AND sufficient separation distance

Example 2

What does a protection concept for a building with an external lightning protection system and a separation distance that can be maintained look like?

Industriegebäude mit ausreichendem Trennungsabstand

A - DEHNventil

Main distribution board: Mounted directly at the entrance point to the building. Protects the electrical installation in the direct environment. The patented RADAX Flow Technology, offers high follow current limitation and thus maximum system availablity.

B - BLITZDUCTOR XTU

Data interface: Protects balanced data interfaces (e.g. RS 485). Integrated actiVsense Technology - the arrester automatically detects the operating voltage of the useful signal and optimally adapts the voltage protection level to it.

C - DEHNguard M YPV

PV installation: Type 2 arrester specially developed for use in PV installations. Protects the DC side of the inverter against surges from inductive couplings. If there is more than 10 metres of cable between the PV system and the inverter, a further arrester is necessary in the roof area.

C - DEHNcube YPV SCI 1000

Alternatively | PV installation: Type 2 arrester in an enclosure. It is mounted directly upstream of the inverter. Available in 2 versions, 1 MPPT and 2 MPPT. If there is more than 10 metres of cable between the PV system and the inverter, a further arrester is necessary in the roof area.

E - UNI earthing clamps/saddle clamps

Equipotential bonding: Clamps suitable for integrating the mounting systems of PV installations in the functional equipotential bonding - functional earthing or lightning equipotential bonding.

External lightning protection WITHOUT sufficient separation distance

Example 3

What does a protection concept for a building with external lightning protection where the sufficient separation distance CANNOT be maintained, e.g. metal roofs, look like?

Industriegebäude ohne ausreichenden Trennungsabstand

A - DEHNventil

Main distribution board: Mounted directly at the entrance point to the building. Protects the electrical installation in the direct environment. The patented RADAX Flow Technology, offers high follow current limitation and thus maximum system availablity.

B - BLITZDUCTOR XTU

Data interface: Protects balanced data interfaces (e.g. RS 485). Integrated actiVsense Technology - the arrester automatically detects the operating voltage of the useful signal and optimally adapts the voltage protection level to it.

C - DEHNcombo YPV

DC side - central inverter: Combined arrester specially developed for use in PV installations. Protects the DC side of the inverter against partial lightning currents and surges. Product details

D - DEHNshield Basic FM

AC side inverter: If the cable length between the grid connection and the inverter is longer than 10 metres, an additional combined arrester is required at the inverter. The combined arrester fulfils the requirements of LPS class III at the point of installation and protects the inverter against any partial lightning currents and surges.

E - UNI earthing clamps/saddle clamps

Equipoetential bonding/earthing: Clamps suitable for integrating the mounting systems of PV installations in the functional equipotential bonding/functional earthing or lightning equipotential bonding.